Difference Uses with Detailed Instruction    -  81 Illingworth Close, Mitcham, CR4 3QF   020 8648 3866 

Discover what 1000+ can do for you!

PROFESSIONAL STRENGTH
Use full strength or dilute with water for superior spray cleaning.

PAINT MESSES
Latex, oil or spray - paint messes have never been so easy to clean-up, which is why 1000+ Stain Remover is a painter's best friend!



CARPET, UPHOLSTERY AND FLOORS
STEP 1: Apply just enough 1000+ Stain Remover to moisten the stain
STEP 2: Rub with fingertips to loosen the stain from the material being cleaned (until you can see the stain has mixed with the product)
STEP 3: Wipe or dab carpet to remove product and stain
STEP 4*: Spray liberally with water - ideally from a spray bottle with a jet stream (better than a mist or pouring it on)
STEP 5: Gently dab away the water and stain with a clean cloth
STEP 6: Repeat steps 4 and 5, if necessary
TIP: For quicker results, use a carpet cleaner filled with plain water in place of steps 3 and 4.

ON SKIN (ALSO FOR MARKERS OR INK)
STEP 1: Apply just enough 1000+ Stain Remover to moisten the stain
STEP 2: Rub with fingertips to dissolve
STEP 3: Rinse under running water or with a damp cloth



PAINT BRUSHES (STILL WET)
STEP 1: Apply just enough 1000+ Stain Remover to moisten the brush/roller
STEP 2: Rub with fingertips to loosen the paint (until the paint has mixed with the product)
STEP 3: Rinse thoroughly with water
STEP 4: Dry with a clean cloth



PAINT BRUSHES (DRIED)
STEP 1: In a glass jar, put enough 1000+ Stain Remover to cover the bristles
STEP 2: Allow to soak overnight
STEP 3: Rinse thoroughly with water
STEP 4: Dry with a clean cloth
STEP 5: Repeat steps 3 and 4, if necessary
This is the KEY STEP (as water is 1000+ Stain Remover's best friend) where you should see the water instantly penetrate the stain and clean the surface that had the stain on it.



STAINS
Wine stains, fruit juices, blood, nail polish, lipstick, shoe polish and grease (to name a few) can be removed safely and easily.



CARPET, UPHOLSTERY AND FLOORS
STEP 1: Apply just enough 1000+ Stain Remover to moisten the stain
STEP 2: Rub with fingertips to loosen the stain (until the stain has mixed with the product)
STEP 3*: Spray liberally with water - ideally from a spray bottle with a jet stream (better than a mist or pouring on it)
STEP 4: Gently dab away the water and stain gently with a clean cloth
STEP 5: Repeat steps 3 and 4, if necessary
TIP: For quicker results, use a carpet cleaner filled with plain water in place of steps 3 and 4.



DRIED NAIL POLISH
STEP 1: Apply just enough 1000+ Stain Remover to moisten the stain
STEP 2: Rub with scouring sponge or toothbrush to loosen the polish
STEP 3*: Spray liberally with water - ideally from a spray bottle with a jet stream (better than a mist or pouring on it)
STEP 4: Gently dab away the water and stain with a clean cloth
STEP 5: Repeat steps 3 and 4, if necessary
? This is the KEY STEP (as water is 1000+ Stain Remover's best friend) where you should see the water instantly penetrate the stain and clean the surface that had the stain on it.






PET MESSES
Pet messes of all kinds are now easier to clean up than ever before.



CARPET, UPHOLSTERY AND PET BEDS
STEP 1: Apply just enough 1000+ Stain Remover to moisten the stain
STEP 2: Rub with scouring sponge or brush to loosen the stain
STEP 3*: Spray liberally with water - ideally from a spray bottle with a jet stream (better than a mist or pouring on it)
STEP 4: Gently dab away the water and stain with a clean cloth
STEP 5: Repeat steps 3 and 4, if necessary
This is the KEY STEP (as water is 1000+ Stain Remover's best friend) where you should see the water instantly penetrate the stain and clean the surface that had the stain on it.



VEHICLE DETAILING
Car, truck, boat or RV detailing inside and out can be done quickly and safely using 1000+ Stain Remover. (Please note that you should never clean your car in direct sunlight.)



CARPETS
STEP 1: Apply just enough 1000+ Stain Remover to moisten the stain
STEP 2: Rub with fingertips to loosen the stain (until the stain has mixed with 1000+)
STEP 3*: Spray liberally with water - ideally from a spray bottle with a jet stream (better than a mist or pouring on it)
STEP 4: Gently dab away the water and stain with a clean cloth
STEP 5: Repeat steps 3 and 4, if necessary



UPHOLSTERY
STEP 1: Dilute 1 parts 1000+ Stain Remover with 4 parts water in a trigger spray bottle
STEP 2: Apply to upholstery
STEP 3: Rub with finger or brush to loosen the stain
STEP 4*: Spray liberally with water - ideally from a spray bottle with a jet stream (better than a mist or pouring on it)
STEP 5: Gently dab away the water and stain with a clean cloth
STEP 6: Repeat steps 4 and 5, if necessary
TIRES AND RIMS
STEP 1: Pour just enough 1000+ Stain Remover to make a light film directly on the tires/rims
STEP 2: Rub with non-abrasive scouring sponge or brush to loosen the dirt
STEP 3*: Rinse thoroughly with water.
This is the KEY STEP (as water is 1000+ Stain Remover's best friend) where you should see the water instantly penetrate the stain and clean the surface that had the stain on it.



LAUNDRY
Use 1000+ Stain Remover to remove those stubborn stains and to brighten your colours.


PRE-WASH STAIN REMOVAL
STEP 1: Apply a liberal amount of 1000+ Stain Remover to stain and rub gently
STEP 2: If stain is food, blood, grass or grease based, let soak for 10-15 minutes. If stain has been allowed to dry let soak for half an hour. If stain is paint, dye, wine/juice garment may require additional soaking.
STEP 3: Launder garment as usual
STEP 4: Repeat for stubborn stains, if necessary
PLEASE NOTE: Drying in the dryer will set the stain into the garment. Be sure to remove the entire stain before drying the garment.



LAUNDRY BOOSTER
STEP 1: Add a squirt of 1000+ Stain Remover (for a full load)
STEP 2: Reduce detergent by half
STEP 3: Wash as usual



GENERAL CLEANING
Household surfaces are quickly and simply cleaned with 1000+ Stain Remover.


COUNTERS, CUPBOARDS, WALLS AND FLOORS
STEP 1: Dilute 1 part 1000+ Stain Remover to up to 10 parts or more water in a trigger spray bottle
STEP 2: Apply to surface
STEP 3: Wipe with cloth or paper towel
SINKS, TUBS AND TOILETS
STEP 1: Squirt a small amount of 1000+ round the fixture
STEP 2: Rub with non-abrasive scouring sponge or brush to loosen the dirt / stain / mold????